Friday, December 24, 2010

Portable VS Desktop

One should be very careful buying a laptop because more than desktops
there are big differences in the technology and feature sets that
matter. Run-down of tech issues:

'True portable' versus 'desktop replacement' tech:

There are at least two major divisions of tech in laptops: tech
designed for laptops and tech designed for desktops but used in laptops.

Laptop tech results in smaller, lighter, cooler-running laptops that
last longer on their batteries. Only downside is they are a lot more
expensive.

Desktop tech results in larger, heavier, hotter-running laptops that
have shorter runtimes on batteries before they need to be recharged. Of
course they are cheaper, sometimes a LOT cheaper, than true portable
tech laptops.

There are likely one or more classes of laptops that would most
accurately be categorized as in between these extremes.

Telling the difference:

On the Intel side, anything labeled "Centrino" is true-portable; but
there are non-Centrino true-portables too. The biggest factor is the
CPU: the "M" for Mobile after the processor, as in Pentium M or Celeron
M, is a huge difference; the chips are barely related to the Pentiums in
desktops. They are really good tech, getting a lot of performance for
a little power, and a lot per clock. So a 1.5 GHz Pentium M sounds
slow but it is more like a 2.25 GHz desktop Pentium 4 or better. Do not
compare the two without multiplying the P-M/C-M speeds. These laptops
often are visually recognizable by being thin & sleek.

Any laptop labeled 'Desktop Replacement' or DTR is one based on
non-portable tech. They are best for those on a budget and/or where the
machine will spend most of its time sitting in one place plugged in to a
wall, or just moved around within a house like between a bedroom and the
living room couch. The true portable tech is worth it if you will be
using the machine on the road a lot or lugging it around in a backpack
or carry case. DTRs look fat (say, around 1" thick, keyboard to desk,
not including screen) and clunky by comparison with the true portables.

In the desktop world AMD is kicking Intel's butt but in the laptop
world it's the other way around. AMD has a portable tech called 'Turion'
meant to compete with Centrino but it's not quite as good. If on the
other hand you are buying a DTR, AMD is probably better because Intel
desktop chips run hotter and perform poorer, especially in games. Also
all current AMD models are 64-bit capable for future operating systems.

In the middle:

Just to confuse things there are intermediate chips: the 'Mobile
Pentium' and 'Athlon64 Mobile'. These are in between on the DTR/portable
spectrum in price & performance, as you would expect. They are more
closely related to desktop tech than portable tech, tho. Also beware of
buying older tech like Pentium III or Athlon XP-based notebooks; if
anyone is still selling these pay bottom dollar.

Graphics & gaming:

Laptop graphics are notoriously slow. But for RTS, it may not matter.
Still the low end may be slow enough to impact the latest RTS's. This
is one area where DTRs just blow away true portables. They can come
with graphics chipsets from NVidia or ATI that compete with decent add-in
card desktop graphics. Pentium M / Celeron M laptops usually come with
Intel graphics, which is slow. Turion laptops are probably faster in
graphics than P-M/C-M's. Find out the graphics chipset the laptop you
are interested in uses and check out on-line reviews to see if anyone
benchmarked an RTS on it, to see if performance will be acceptable.
Graphics becomes a LOT more important if you plan on playing any modern
shooters on the machine.

Other stuff:

- steer clear of any Transmeta CPU based laptops (slowww).

- never buy a laptop with less than 512MB RAM if you can afford it;
Windows XP runs slow in 256M. Prefer a laptop upgradable to at least 1GB.

- buy XP Professional if you plan on ever logging on to a corporate
network

- I care, but you may not, for video out. I can load a laptop's hard
drive with movies & recorded TV MPEG files and use it as a portable
video jukebox. Some laptops have S-Video out ports built-in, some don't.

- Some laptops, especially smaller ones, require an expensive and / or
easy to lose adaptor to plug into an external monitor. Prefer one with
a standard VGA or DVI out port.

- Smaller laptops often omit an optical drive. I wouldn't want to get
one without a DVD burner, for back-ups and stuff, but that's just me.

- Some laptops include FireWire/IEEE1394 ports for hooking up digital
camcorders. Also can be used as a high-speed file transfer / network
port if your desktop has FireWire (400MBps = 4x Ethernet, unless both
have Gigabit Ethernet).

- You want at least 'b & g' wireless support; having no 'g' is
obsolete. 'n' or 'pre-n' is cutting edge.

- Some laptops include built-in card readers for uploading photographs
from your camera quickly.

- All new laptops should include USB 2.0.

- Laptop speakers are always crappy. You can get an awesome pair of
JBL Duet speakers for




Mike Newhall
http://activetechconsulting.com/
mikenewhall@activetechconsulting.com

My Links : find more about Canon Powershot SX10 at SX 10 Revi find mre save about Elevated Toilet Seat and bathroom aids If you're looking to buy a cheap computer chairand Cheap Computer you've come to the right place.

Tuesday, December 21, 2010

ZALMAN ZALMAN VF950-LED QUIET DUAL HEATPIPE VGA COOLER RETAIL - VF950 LED

ZALMAN ZALMAN VF950-LED QUIET DUAL HEATPIPE VGA COOLER RETAIL - VF950 LED






Product Features


  • The product is equipped with Zalman's patented VFP (Variable Fin Profile) technology.
  • Fan installed inside the heatsink maximizes the cooling efficiency and the product's maximized dissipation surface area provides excellent performance.
  • Use of one high performance WBT(W Bending Technology) heatpipe maximizes heat transfer.
  • Heatsink weight has been minimized with the use of thin aluminum fins (0.3mm), which eliminates excessive force on the VGA card.
  • 80mm Blue LED Fan for excellent performance and great aesthetics.


Read More

Visit : find more about Canon Powershot SX10 at SX 10 Revi here you can find more best about Transport Chair and ipod speakers

Friday, December 17, 2010

Nintendo DSi Handheld Specifications

Today we will look at the Nintendo DSi specifications to see what the new handheld console has to offer. Released to Europe and US in April this new console will be the most advanced handheld on the market to date.

So lets take a look at the specs in detail.

Two screens, 3.25 inches in size. They are larger than the previous DS Lite and have a resolution of 256 x 192. The screens are smaller than the Sony PSP which has a 4.3 inch display and the Apple I-touch at 3.5 inch but bear in mind that the DSi has two screens creating a bigger viewing area.

Cameras. Two cameras provide the DSi with unique gaming abilities and one of them is VGA. The first camera is located on the internal hinge to capture the players face and the second is located externally on the corner of the lid allowing the user to take pictures like a proper camera and using the gaming screens to view the shot. The PSP has an optional camera, which is 1.3mega pixels. The iPod Touch has a built in camera of 2 mega pixels.

Memory wise the Nintendo DSi provides an SD Card slot along with internal flash memory storage of 256mb. The PSP can hold a memory card of up to 16gb and the iPod Touch has 8 to 32gb depending on which size the owner opts for.

All handhelds mentioned have Wi-Fi capabilities. This is an excellent feature which allows users to surf the web, connect with other consoles of the same type, and download new games, applications and software updates. They all have their own customised stores. Nintendo DSi has the DSi - ware shop, PSP has the PS Store and the iPod Touch uses the App Store.

The DSi has single touch screen technology, the PSP does not have this capability although there is a home brew piece of equipment that owners can buy to set up their own touch screen function. The iPod Touch does have touch screen which is multi-touch technology.

The Nintendo DSi is 12% thinner than the DS Lite but the length is a little longer. The power switch on the DS Lite has been replaced to a button on the DSi which is going back to the original DS. A matted finish has been applied compared to the gloss finish of the DS Lite, which is meant to prevent showing finger prints.

Primarily it will be released in matte black and matte white in Europe and the US. In Japan, Nintendo has already released colours in pink, lime green and metallic blue on 20th of March 2009. Battery life is reduced to 9-14 hours on the lowest brightness setting compared to the 15-19 hours of its predecessor. The Game Boy Advanced slot has been removed which means the DSi has lost backward compatibility. This decision was made to improve portability without sacrificing durability.

The CPU in the Nintendo DSi is an ARM clocked at 133 MHz and has 16 MB of RAM. and the speakers have been improved from the previous model. All said and done the Nintendo DSi is an impressive piece of equipment which will keep gamers happy until some thing bigger and better hits the market which for 2009 at least is very unlikely.




The Nintendo DSi Handheld Console will be released in the UK on 3rd April at a retail price of £150. To pick up a cheap Nintendo DSi you will need to do your research on the net. A good place to start is the link below.

Cheap Nintendo DSi Handheld Consoles

Keep upto date with everything about Nintendos then you can visit the blog Nintendo Handhelds

My Links : find more about Canon Powershot SX10 at SX 10 Revi you can find more save about fx lightsaber darth maul, fx lightsaber removable blade and lightsaber. you can find more best about Delonghi Ec155, delonghi and espresso machine. find mre save about Elevated Toilet Seat and bathroom aids

Tuesday, December 14, 2010

Husqvarna Viking Sewing Machine - Great Features

A top of the line sewing and embroidery machine, the Husqvarna Viking Designer Diamond sewing machine will elevate your sewing experience. It offers an interactive screen with full color and wide VGA touch and it provides the highest resolution available. You can actually see stitches and embroidery designs in 3D and it is so easy to navigate. You can use a stylus or an optional USB mouse to select any function, stitch or information - all with just a touch.

This machine also offers the largest sewing and embroidery area in the entire home sewing industry. You can embroider larger than life designs and there are three hoops included. It offers the longest free arm in the industry and a space of nearly ten inches to the right of the needle. This space is great for sewing large quilts, home decor projects and garments.

The Designer Diamond Husqvarna Viking sewing machine is extremely easy to use and, if you value the fewest steps between you and every function, you will appreciate the level of convenience that this machine offers. It includes Sensor System technology that senses fabric thickness and will give you a perfect, even feed of any fabric.

The Sewing Advisor on this machine allows you to enter fabric, weight and sewing technique and this technology will automatically take care of all the settings; this includes stitch, stitch width, stitch length, sewing speed, thread tension and foot pressure. The interactive machine will display the recommended information.

It also includes an Embroidery Advisor that will recommend the appropriate needle, stabilizer and thread, and it will give you tips for embroidering with specialty fabrics and threads. This is definitely not your grandmother's sewing machine as it is chock full of innovative features.

This Husqvarna Viking sewing machine will save your place in embroidery when you stop embroidering or when you are interrupted. The adjustable E-Light System will give you the absolute best lighting for every sewing situation. It can easily go from intense to soft light, always giving you the best possible visibility.

These innovative advances in sewing and embroidery are so exceptional; it is like having every sewing desire fulfilled in one spectacular machine. You can only begin to imagine the opportunities that will present themselves through using this Husqvarna Viking sewing machine.

With this machine, you will get sewing instructions for an incredibly beautiful long, strapless dress that would certainly make a statement at any party, a purse that would complement the dress or stand alone as a one-of-a-kind statement piece, a quilt that would show artistic craftsmanship and creativity (could also be used as a wall hanging), a tablecloth with extraordinary embroideries and an elegant jewelry holder that would be a wonderful gift for friends or family, or to keep for yourself.

This Husqvarna Viking sewing machine is a work of art in itself and would give you a truly unique sewing and embroidery experience.




Jack Tate is a full time computer expert with a passion for life and extreme sports.

I hope you found this article informative and helpful. You can visit http://husqvarna-sewing-machine.com for some more information about the Husqvarna Viking Sewing Machine and they usually have a nice product selection to choose from.

My Links : find more about Canon Powershot SX10 at SX 10 Revi find more best about Glycolic Acid and hd video find more best about slide projectors for sale

Friday, December 10, 2010

Intel Atom Processor For Internet Based Information System

Introduction:

Intel has introduced two versions of the Atom processor. The ones, which are of the series 2xx, 3xx and N2xx with codename "Diamondville", have been especially designed for nettops and netbooks, while the Z5xx codenamed "Silverthorne" is for the mobile Internet devices (MIDs). This particular chip is physically much smaller in size than the others with low power drain, making it suitable for MIDs.

Nettops are the future concept of desk top PCs, in which there would be a solid state disk, no optical drive, and would have a few USB ports for your convenience. It would be a low cost item, around $300, and would be used for basic computing tasks in which you would be able to surf the Internet, access web based and rich internet applications, and have audio and video playback. The netbooks would be ultra-thin notebooks having wireless connectivity and all other functions of a nettop.

Intel's Atom processor for mobile Internet devices brings to you the smallest pocket size Internet experience, having low power consumption and high performance. Intel brings in a revolution in MIDs design, and these devices would gain much competitive advantage utilising Intel Atom processors, along with low power companion chips with integrated graphics, providing an Internet experience and high definition video.

The architecture:

The Atom family has 32 KB of L1 instruction cache, 24 KB of L1 data cache and an L2 cache of 512 KB, with 1 MB in the dual core processor, and the types and capacities in the processors are determined by the chipsets and not by the processors.

The Atom has been built on a different micro-architecture than those of the present dual core ones, and yet the Atom family contains the same instruction set as found in x86 processors as in the core architecture. The processors like the Pentium Pro, Pentium II and higher ran microinstructions not in order, where-as the Atom runs such instructions in order just like the first Pentium. This has enabled reduction in cost, since the components requited for sending and controlling microinstructions has been removed from the design.

Intel's Atom processor brings in the power of mobile Internet, as the smallest mobile Internet processor in the world. The Atom measures less than 25 square millimeters in size, with the 45nm-process chips having a thermal design specification of 0.6 to 2.5 Watt range, going up to a speed of 1.8 GHz.

The Atom family, the smallest of all processors, has certain reasons to be small. First, the Atom processors are all 32bit x86 chips, and by this Intel have done away with 64bit processing with a view that the MIDs of today's and tomorrow's are not going to be available with 64bit processing, there-by using less number of transistors. The concept has reduced the price of Atom processors.

Design features:

Most of the Atom family utilises the ability of using the idle processor time forming a virtual second processor, which is termed as "hyperthreading technology". In this, the operating system looks at each of the core as dual processors, often called two threads. No doubt that this technology is less efficient than "dual core" systems, but then again it provides the system with extra performance. The clock speed of Atom processors remains the same even when idling, and does not clock down in idle state.

The Atom has been designed using 45 nanometer (nm) technology, which has made the Atom processor the smallest in the world. This has been possible with the reduction in the die size since the components going inside the semiconductor are smaller. As a comparison, the Celeron chip utilises 90nm technology, and each of the logical gates within it is four times the size of that of the Atom.

Devices built with Atom processors run cooler. While in the usual mobile processors the thermal design power (TDP) may top at 100 degree Celsius or more, the Atom family runs a bit cooler, topping at 90 degrees with some of the processors having a maximum of 85 degrees Celsius. This makes a lot of difference when you consider hand-held and pocket-sized MIDs. The processors do not only make the size of the devices smaller, but also reduces battery drain from cooling fans.

Applications:

Intel's Atom processor has the smallest footprint, and with its low power consumption and intricate instruction sets, the processor has set a new standard in Internet computing. On an average the Atom family draws about 2watts of power, which makes it an ideal processor for mobile Internet device (MIDs), netlops, and netbooks.

One of the Atom family members, the N270 processor, has wide range of applications in industrial computing. The device with its low power consumption gives a superb thermal performance allowing fan-less operations. This becomes an important factor since, with the absence of moving parts, such as the fan, the overall reliability of the system designed increases appreciably, and there is no need to make provisions for vents in the design.

Critical evaluation:

What does the Atom family has to offer? It is quite interesting to note that Intel's Atom family has modern functions like, Extended Memory 64 Technology (EM64T), Supplemental Streaming SIMD Extension 3 (SSSE3), etc. put onto an older architecture. Since the Pentium, the Atom is the first to be x86 family of processors. The power management in the processors and their fabrication have been the two most important factors in cost saving at the expense of performance, and as such it does not make the Atom to be a competitor to Core 2 Duo.

Reports say that power consumption and attempt to integrate processors into portable or embedded devices have always been a problem for Intel. The Atom processors are not the first ones that Intel has attempted to bring out aimed at the same kinds of applications. However, the Atom family is radically different from others in the sense that Intel has a new architecture in the Atom which drastically reduces power consumption.

Few of the test results obtained while comparing the Atom against C7 and Celeron-M show that, the overall performance of Atom falls in between C7 and Celeron-M, when under an identical frequency condition. The tests were carried out in Netbooks with the frequency of C7 set to close to that of the Atom and the Celeron-M at a significantly lower frequency. It was concluded that the Atom based machines would have the same kind of performance as that of the machines that we have today.

Whatever it is, the battery life is of a great concern as far as portable machines are concerned. This is going to be an important factor for the user. It was found that cooling requirements in a desktop wind PC were much lower for an Atom based machine, and it can be concluded that it will be even lower in portable machines. In the event the Atom proves to be more battery efficient than Celeron-M, then we might see more Atom based Eee PC owners, with users selling off their Celeron-M based systems to upgrade to the Atom based ones.




Prabir Sen, M.Sc Engg (Computer Science) London.
Sr. Project Manager,
Oracle Applications.

Visit : find more about Canon Powershot SX10 at SX 10 Revi Cordless Steam Iron Sale can help you to find more best about cordless steam iron and steam iron

Monday, December 6, 2010

Arctic Cooling Accelero S1 Rev 2 VGA Cooler

Arctic Cooling Accelero S1 Rev 2 VGA Cooler






Product Features


  • Noiseless Cooling
  • Special Heat Spreader for Voltage Regulator Cooling
  • Supports the latest cards, Radeon HD 3870, 3850 , GeForce 8800GTS (G92) and 8800GT.


Read More

go to link : find more about Canon Powershot SX10 at SX 10 Revi way to find more best about Blood Pressure Monitor,digital camera under 100 and folding chair you can find more Converter Box at Converter Box Reviews

Friday, December 3, 2010

Memory Cooler Reviews

It allows to increase life and performance of your respective DDR and SDCRAM. It really is straightforward to install within the shortest time achievable.

You'll find different sorts of memory cooler machines which you can opt for from. A few of these incorporate a ULTRA Copper Memory Cooler with Temperature pipe. This cooler could be utilised for a single-sided or double-sided memory to eliminate warmth from the RAM by means of allowing in air. It's effortless to install memory cooler that can improve the performance of your respective PC inside the shortest time. Heat usually accumulates in your machine and therefore may perhaps influence its functioning. It is vital to get rid of this temperature so that you can get your PC back to its quick and effective working speed. PCs function far better under optimal conditions.

You will find considerations that you ought to look out for when you're purchasing a memory cooler.

It ought to not require lapping of your respective CPU or the HS. It need to have the best size. You will find distinct varieties of memory coolers and of varying sizes. The very best dimension is 1 that will fit without your ram slots for effortless access. You must examine the positioning of the cooler, no matter whether it might influence your RAM slot access.

Examine whether or not it can be plugged into a power method for it to function well. This will give you a choice of obtaining a single that fits the positioning of the energy source. It really should also have the ability to retain your machine awesome based on the use and size of the machine. It need to for that reason produce effective cooling effect to maintain your machines at the proper operating temperatures.

A few of the other forms of memory coolers which you can get in the market incorporate a Corsair Dominator memory airflow fan. This operates by adding the airflow into your memory subsystem. It's a design that matches with the Dominator warm sinks to enable for more temperature to be removed from the DHX XMS2 Dominator modules. It has attributes for example a special designed airflow unit, three fans, trachometer controlled for speed variation and a mount used for memory clip to the socket.

The other type is the Vantec ICEBERQ DDR memory warm spreader. It helps in improving operation of your respective RAM performance to avoid the process from crashing because of unnecessary heat. It's efficient measurement that very easily fits on all motherboards. It is made from Aluminum and Copper.

The Zalman VGA Ram Heatsink ZM-RHS1 is a memory cooler that facilitates to awesome your VGA card. It works by increasing the surface area utilised for high temperature transfer. S




Select a memory cooler that has straightforward installation, unique and offer fantastic cooling effects to your RAM and machines for improved efficiency of the machine systems.Visit http://memorycooler.com/keep-your-system-cool-all-the-way/ to learn why it is important to keep your memory cool.

See Also : find more about Canon Powershot SX10 at SX 10 Revi If you're looking to buy a cheap computer chairand Cheap Computer you've come to the right place.

Saturday, November 27, 2010

Most Common Kodak Printer and Kodak Ink Cartridge Problems and Troubleshooting

Kodak printers are a good option if you are going to buy a printer. It could be one of the options you should definitely consider. However, like all other printer models even Kodak printers are prone to some common printer, as well as, cartridge problems. Troubleshooting these problems is fairly easy.

Here is a list of problems that you might face and we have also offered their solutions.

The Power LED shows no Illumination; the Printer does not power On

This is a common enough problem. The possible cause of this occurrence could be that the cables and cords are not connected as securely as they must be. You must make sure that the cords are connected in accordance with the instructions. Another reason for this could be the fact that the printer power is not 'on'. You might just have turned the switch in the 'I' position.

The Printing Process is Slow

Another common problem and the culprit in this case might be the size of the image file. This could take up a lot of time for the printer to process the PostScript file. Thus, the only solution in this case is to show some patience. At times, the slow printing process is a result of the printer getting warm. The best thing to do in such a case would be to turn off the printer and allow it to cool down. Also, you could think about changing the printer location and shifting it to a cooler location.

No Action Taken When Job is Sent

The possible solution to this problem could be to check and recheck whether the job is actually being processed or not. Moreover, you must check whether you have set the printer in the correct mode for printing. You must use the Raster Mode while using the export module and all other types of printing can be done by choosing the PostScript mode.

The Processing is Complete, No Print

This is another common problem that affects the Kodak Printer. This is an ink cartridge related problem and not a general printer problem. All you need to do is clean the head of the ink cartridges. Accumulated dust or dried color might prevent the printing process from taking place; hence you must clean the head of the cartridges. All Kodak printers come with a set of tools that not only clean the cartridge heads but align them as well.

Printer's Not Working after Cartridge Change

Once the ink in the cartridge is finished, you either need to change the cartridges or get them refilled with ink. Whatever, the case maybe, you will have to take the cartridges out of the printer and put them back in place. Some times, you will find that the printer does not print, even though the cartridge ink is full. The problem could be sorted out by checking if the cartridges are securely in place. Secure it, and the printer is sure to start working.




This Article is written by John C Aikin from MyOfficePortal the contributor of Printer Cartridges Blog. More information on the subject is at myofficeportal.org, and related resources can be found at Kodak ink cartridge.

Friends Link : find more about Canon Powershot SX10 at SX 10 Revi find mre save about Elevated Toilet Seat and bathroom aids

Tuesday, November 23, 2010

Ways to Save Money on Printer Ink and Toner Cartridge Purchases

Do you want to cut your printing costs by up to 50%? There are many ways you can do this. Here are some tips to help you can started.

1. Buy Re-manufactured Cartridges - Purchasing re-manufactured cartridges will generally cost you less than purchasing new cartridges. Re-manufactured cartridges are printer cartridges that have been used at least once and then disassembled, cleaned and had worn parts replaced and refilled. Typically, remanufactured cartridges can save you from 30 to 50 percent off the price of new cartridges, or more.

2. Purchase refilled ink-jet cartridges or self-refill kits. These kits come with all the tools and instructions necessary to refill your own ink or toner cartridge. Purchasing these cartridges saves money and is good for the environment.

3. Buy in Bulk - You can save more money by purchasing printer cartridges in large quantities. You will save a lot more over the already discounted cost on new cartridges. If you frequently do a lot of printing you, can save even more by purchasing recycled or re-manufactured printer cartridges in bulk.

4. Purchase a compatible inkjet cartridge or toner cartridge. These are cartridges made from new parts and manufactured to OEM specifications for you exact printer. If you cannot find a compatible cartridge for your inkjet printer, you may want to consider remanufactured inkjet cartridges.

5. Buy ink and Refill your Cartridges whenever possible - Whether you're printing documents, photos or web pages, refilling your empty printer cartridges can save you up to 50% compared with buying new. You don't have to spend a fortune on inkjet cartridges and printing costs.

There are many other ways to save money on printer cartridges, but shopping around before you buy can also make it easier to get the best value. When shopping around for the best prices on printer cartridges, use shopping bots (Froogle, Dealtime), bargain sites, Coupon sites and Auction sites (eBay). Shopping bots are essentially search engines for gathering prices for products from a variety of vendors. They allow you to quickly search for merchandise across a wide variety of sites. They are an effective way to quickly get a feel for the available deals. Bargain or Discount sites get excess merchandise from other retailers and sell the merchandise at bargain prices.




Copyright © 2005. Clive Chansa writes for the Discount Printer Cartridges Website at: http://www.discount-printer-cartridges.org.uk/ and he's also a regular contributor to the Power Batteries Website at http://www.power-batteries.co.uk/

Recommend : find more about Canon Powershot SX10 at SX 10 Revi way to find more best about Blood Pressure Monitor,digital camera under 100 and folding chair LCD HDTV LN46C630 46-Inch1080p120Hz (Black)and how to buy LCD HDTV

Sunday, November 14, 2010

Why is a Custom USB Flash Drive Infinitely Cooler?

An USB flash drive may be a common every day item you see every day. You might have stopped noticing them right around when the 1GB models became mainstream and everyone got one. Now they're just another thing you have to have on your key chain without any of that added wow! This is because these flash drives are cheap and easy.

You can have a flash drive in two days from any webshop, but have you thought about making them exciting again? There are a few good reasons to do so and becoming infinitely cool at the LAN you go to every other month.

A custom USB flash drive is not gradually more expensive than a normal one. Why would anyone buy a normal 2gb flash drive for $8 when they can have a custom printed one for $11? It's just 3 dollars more, but the end result is so much more cool.

If you happen to go out with a geek and they already have all the geeky stuff geeks usually have, you're out of luck. Unless you make a super cool flash drive and give that as a gift. Not everybody runs around with a printed horde symbol. Just make sure you understand what alliance and horde is and find out your boyfriend or girlfriend plays the faction you're about to get printed.

How cool is that to get one with your favorite stuff on it? A custom USB drive is easy to get. Just by looking around online you'll uncover twenty different companies that want your three dollars per pen drive. You don't have to choose right away but it makes sense to check out a few before you do.

Look around, see if any of them has something extra, like fast turnaround times or they provide the device themselves.

Custom USB drives are usually made from lower capacity models. 64 megabyte pen drives are cheap as chips but they're not much good these days, maybe a settings file and an mp3 fits on them, I suggest looking for something bigger.

An 1GB flash drive for example is perfectly fine for storing a CD worth of data and these days that is the minimum a storage media has to give in order to be useful.

If you don't know where to go and how to ensure that your order goes through as you've imagined, consult with forums, articles and reviews. A few minutes spent with research will cut most of the stupid mistakes one can make.




I hope you enjoyed this article about the custom USB pen drive. If you would like to read more about the topic or just anything computer related, check out my site.

Related : find more about Canon Powershot SX10 at SX 10 Revi find mre save about Shower Massage and foot massager you can find more Converter Box at Converter Box Reviews find more save Portable DVD Player

Monday, November 8, 2010

All in One Printer Scanner Fax

When you go for buying all in one printer scanner fax, you should know that there are certain things that need to be taken into consideration. You should be ready to spend a good amount of money to get the best one. Although you can find lots of multifunction printers, it is important that you get the right one for you which would help you to do a lot of things in your office. If you get the cheap one for you then there are many chances that the printer might not function well. Instead spent some more money and get the best one.

Do not go for less speed
It is very important that you check the speed of the modem/fax. It is also important that the speed of your fax/modem should be at least 33 kbps. This means that you would not have to worry as it would help you in saving money as the fax would take very less time on your phone line. So, it is very important that you check the features of the fax very carefully. Even if you are looking for multifunction printer for fax broadcasting or also group dialing, then you should check that it has got all the features.

Test before buying
The best thing that you should do before buying all in one printer scanner fax is to test or check it before buying. This is necessary so that you can check how much time the multifunction printer is taking to print, scan and fax the documents. Both time as well as money matters and so you need to ensure that you get both at the same time by getting the best multifunction printer for your office use. So, these are the important things that needs to be taken into consideration when you go for buying the printer.




Thank you for taking your time to read this article. Looking for more information on printer scanner copier fax machine? Visit this website now at printer scanner fax and learn more about this topic!

Friends Link : find more about Canon Powershot SX10 at SX 10 Revi find more best about Glycolic Acid and hd video find mre save about Shower Massage and foot massager

Monday, November 1, 2010

The Best Digital Camera Binoculars For 2009

There's nothing that sounds cooler to a gadget geek, then digital camera binoculars. They have that ultra slick James Bond type feel going for them. Or like something Batman would have in his utility belt. While that all may sound pretty cool, this type of binoculars really do have a very practical utilitarian side to them. Imagine how much easier it is for bird watchers, to get a rare glimpse of that red breasted whatever bird through their binoculars, and then click a button and have it captured. Without ever having to reach for their digital camera, and risk their target flying away. Sports fans are another obvious group that would enjoy a gift like this. Especially those watching from the cheap sets at their favorite sporting event.

Here's a few quick reviews of the more popular binoculars with a digital camera built in.

Bushnell Image View 8x21 Binocular w/VGA camera

These Busnell binoculars sport a pretty decent image clarity, for the price. If you happen to be an Apple Mac user, you'll want to steer clear of these, as they're not totally compatible. They go for around $50 or a little more on many of the online shopping sites. They provide the flexibility of taking both still photographs, or video. This is a great binocular camera for the casual user, but the more serious bird watching type, may want to spend a little more money. Specifically, take a look at the last digcam binoculars (From Barska) in this review. It uses a standard USB connector to upload pictures and videos taken to your computer.

BinoCatch 4x28 Digital Binoculars w/Built-In Digital Camera/Camcorder

These usually go for about $50, but I've seen them in the $20 price range as well. A bit of a toy set, but something that may be fun for the kids, or maybe a one time usage. You get a pretty good software bundle with it for the price. ArcSoft Photoimpression, My DSC, and PCCam are all included that alone makes it worth a few bucks. The formfactor construction is a little on the light side. The plasctic used could have been better, and you'll have to treat this one with a little care because of it. You do, however get 4x28 magnification, video capture, and a few extras. It's kind of 50% camera, and 50% binoculars.




Barska Point 'N View 4.0MP 8x32mm Binocular

This 4MP version is a big improvement over prior versions that were 2MP.  The flip up LCD screen is a nice feature as well.  It hides away when your just using the binoculars, but is readily available, when you need to take some quick pictures or videos.  It's often difficult to find a good digital camera, and good binoculars in one package, but Barska seems to have found the right blend.  It's far nicer than the Vivitar digital camera binoculars I was looking at previously.  An optional SD card can be used with these binoculars.

See Also : find more about Canon Powershot SX10 at SX 10 Revi you can find more Converter Box at Converter Box Reviews find more reviews about Lasko Heate LCD HDTV LN46C630 46-Inch1080p120Hz (Black)and how to buy LCD HDTV

Tuesday, October 26, 2010

Network Cables

A network consists of two or more computers linked together to share resources such as a printer or a scanner, exchange files, and enable electronic connectivity. Network cables are data transmission cables and are used to connect one network device to another. These cables enable high-speed data transfers between different components of the network.

Different types of network cables are used depending on the kind of network. The type of cable used for a network depends on the network's topology, protocol, and size. If a network has large number of network devices, it will need cables that provide high speed and error free connectivity.

Some of the cables being used today are Unshielded Twisted Pair (UTP) cables, coaxial cables and fiber optic cables. The UTP cable is the most popular variety, largely used for school networks as it transfers data at 100 mbps. Coaxial cables have a single copper conductor at their center. A plastic layer provides insulation between the center conductor and the braided metal shield. The outer metal shield blocks out outer interferences such as lights, motors and other computers. Fiber optic cables consist of a center glass core surrounded by several layers of protective materials. It transmits light rather than electronic signals and transfers signals over much longer distances than coaxial and twisted pair cables.

A local area network (LAN) requires network cables to stay connected. Almost every organization is going for networking these days to improve efficiency. This has increased the demand for network cables.

Network cables are the backbone of any network. However, today several networks are switching over to other mediums of data transfer such as high frequency radio signals, and infrared light beams to connect the workstations. These systems are not only fast and effective, but also do away with the problem of maintain several hundred feet of cables spreading across the workspace. With such technologies coming to the forefront, the future may well tilt in favor of wireless systems.




Cables provides detailed information on Network Cables, Cables, Computer Cables, USB Cables and more. Cables is affiliated with Cable Modem Reviews [http://www.e-CableModems.com].

Recommend : find more about Canon Powershot SX10 at SX 10 Revi find mre save about Elevated Toilet Seat and bathroom aids

Saturday, October 23, 2010

The HP C4096A Toner - Should You Buy a Compatible Toner?

Hewlett Packard is one of the premier companies as far as printers are concerned and their model HP LaserJet 2100 with compatible HP C4096A toner is no exception. Rising to meet all needs of the modern office, this machine comes through on all categories in terms of performance. No matter the project, the HP LaserJet 2100 is an outstanding multi-purpose office expert when it comes to providing stunning prints each and every time.

Want a way to save money and help out the environment? Why not look into a remanufactured HP C4096A toner cartridge? The savings that you will get is no small amount and you can also feel good about helping out the environment.

It really doesn't matter if your printer is at home or if you use it in the office, but noting for your customers that you participate in a greener environment may be something to distinguish your business from the competition.   It's a great thing to advertise that you're doing everything possible to help the planet after all!

Instead of opting for the HP C4096A OEM toner cartridge, you can save at least $50 in most cases by going with one that is remanufactured. That's a lot of money when you figure that a larger business can buy as many as 10 boxes or more of toner at one time.

So what if you're only one person who has a printer at home? You are going to want to save that much money too, of course. In your case you may only need to buy a box of toner every few months or so. But just think of all the other things you will be able to spend that $50 on!

Plus why not help out the environment some too by getting the HP C4096A toner cartridge that is remanufactured. It's amazing that it's so much less in cost overall. And next time your kids' have a report at school about being green, they can include you in their report.

Even though some people feel it's best to always stick with the HP C4096A OEM toner, or the original equipment manufacturer, why not check into saving some money for your business? The boss may give you a raise with this idea!

In conjunction with HP C4096A toner, the HP LaserJet 2100 printer administers an uncanny power to generate some of the most stylized and precise looking prints on the market. An superior investment for any office, this HP printer provides stunning details and print speeds that are top notch and will awe employees and owners alike.

Printing like a pro is speedy and simple with the user-friendly interface offered across the board by Hewlett Packard. Suiting the needs of any user, the HP LaserJet 2100 has a very minimal learning curve and is no problem at all to use regardless of printer knowledge. Installing or repairing the top quality HP C4096A toner is just as simple and convenient.




The HP LaserJet 2100 with the impressive HP C4096A Toner is more than capable of rising above your every perception with no issues for the size of the project or the needs of your home business. Adding a high capability HP Cartridges to your printer will only guarantee that the quality of your prints and the stunning, polished look of your jobs will continue to impress and captivate. It's easy to upgrade to the printer your office needs and rid yourself of toners that are not friendly to the environment and printers that just don't make the grade.

See Also : find more about Canon Powershot SX10 at SX 10 Revi read about cat condo , cat furniture, cat tower, cat tree.

Wednesday, October 20, 2010

VGA Extender - Worthwhile For Transmitting High Quality Images Or Video Over Long Distances

VGA video can be transmitted using Cat5/5e/6 cables from a computer to a display placed up to 950 feet away with the help of VGA extenders. These devices are sometimes called VGA Boosters, signal boosters or VGA baluns. These are used to increase the signal strength from a VGA port and allow it to be passed over a Cat5/5e/6 cable.

While there are a variety of video extenders available on the market today, such as DVI extender, HDMI extender, Composite extender, Component extender, the VGA extender is still the most commonly used. The VGA over Cat5 extender is a solution comprising of local and remote units. While the former connects to the video source, the latter is connected to the extended display. Both these units are designed to ensure a rapid signal delivery. Using Cat5 cables, these devices enable separation of digital displays and the hardware running them. Despite the large distances, these devices provide crisp and sharp images with a resolution up to 1900x1200 and are designed to deliver uncompromised video quality. With the help of extenders you can keep your PC in a secure location while the video is still accessible to your customers or employees.

VGA extenders are compatible with any operating system and any video source with a VGA connection, including PCs, DVD players, VHS, DVRs and so on. Some VGA to Cat5 extenders are also available with an audio option. In addition, several models come as VGA splitter extenders with 2, 4 or 8 ports and can be controlled with optional RS232 or infrared remote. Another version of this device is also made in a wireless format. This wireless vga extender connects to any projector with a VGA/HD15 port and shares it with multiple computer monitors as well.

These extenders work with simple plug and play installation and setup and require no additional software or drivers. Provide secure access, control, and management within your enterprise infrastructure when it is necessary. Due to these features, the VGA extenders are often used in Military, financial and medical arenas. They are also being used in schools, businesses, airports, restaurants, banks and shopping malls. These extender units provide the flexibility you need for a customized digital signage installation and are therefore an ideal solution for digital signage applications.




Visit to know more about VGA extender and KVM extender.

See Also : find more about Canon Powershot SX10 at SX 10 Revi find mre save about Shower Massage and foot massager find more best about slide projectors for sale way to find booster seat, graco high chair, high chairs for babies

Sunday, October 17, 2010

Great Price Thermaltake CL-W0153 for $57.99

Thermaltake Cl-W0153 Tmg Nd4 Lcs Vga Cooler For Nvidia Review



This product is a good block for liquid cooling your nVidia 8800GTX card. There are slightly better ones available but for what you pay for this block it cant be beat. Highly Recommended.



Thermaltake Cl-W0153 Tmg Nd4 Lcs Vga Cooler For Nvidia Feature


  • P/N - CL-W0153
  • Compatibility - nVidia G8800 GTX
  • Dimension - 199.4(L)x 96.9(W)x 36.5(H)mm
  • Waterblock Material - Brazing pure copper waterblock
  • Heatsink Material - Aluminum fin



Thermaltake Cl-W0153 Tmg Nd4 Lcs Vga Cooler For Nvidia Overview


Features - Super Silent at 18dBA. Effective cooling for the GPU and the video card memory at the same time. Brazing Pure Copper Waterblock for maximum heat conductivity from heat source. Super Silent - Super quiet 60mm low speed fan,Unique 60mm fan blade design to optimize the airflow while keeping the noise at minimal. Maximum & Effective Cooling - Pure Copper Base for maximum heat conductivity from heat source,Advanced Brazing Technology enhances the thermal efficiency, Effective cooling for the GPU and the video card memory at the same time with aluminum memory heatsink, Special fan shroud concentrates the airflow and focuses the air to the hotspot. Easy Installation - Easy to install


Available at Amazon Check Price Now!


Related Products



Customer Reviews












*** Product Information and Prices Stored: Oct 17, 2010 01:10:10

Recommend : find more about Canon Powershot SX10 at SX 10 Revi find mre save about Elevated Toilet Seat and bathroom aids

Wednesday, October 13, 2010

How to Make Your Computer Last Longer

Computers do not last forever otherwise manufacturers' would give unlimited warranties to their customers. Unfortunately most of these devices only last for an average of three years and do not function optimally for over half the time. When this happens our options are limited - we can either discard, replace or upgrade the gadget. However, as it is not advisable to just throw away a device that was bought with hard earned money I would say the best options would be to either replace or upgrade it.

Most computer faults usually occur in one of the following hardware.

The Video Graphics Adapter (VGA) which helps the computer provide its video output could easily be upgraded if it develops a problem. After replacing the old hardware, ensure its appropriate driver is also installed.

The Random Access Memory (RAM) assists the computer process data depending on its size and capacity. Simply upgrading this hardware could improve system performance.

The Central Processing Unit (CPU) is the heartbeat of the computer. It controls the execution of programs on the computer and could be quite difficult to upgrade without tampering with the motherboard hence replacing the computer might be a better option if the CPU develops a fault.

The Hard Disc Drive (HDD) is where all documents and program files are stored in the computer. This is probably one of the most common hardware to upgrade. Some computers can be expanded to have more than one HDD while if you are running out of disc space there are plenty of cheap and affordable HDDs in the market to upgrade your computer.

The Motherboard is the circuit board on the computer. It usually develop breaks down due to overheating or electrical faults. Whenever this happens, it is simply better to replace the system as you don't want to be toying away with electrical tools like the soldering iron, etc.

Whatever your decision, it is very important to make sure it is carefully thought through and influenced by cost, safety and electronic-waste management considerations.




Read more interesting articles at http://www.techsling.com.

Recommend : find more about Canon Powershot SX10 at SX 10 Revi Fnd more about gps car tracker at GPS car Tracker Cheap blog find more best about slide projectors for sale you can find more Converter Box at Converter Box Reviews

Sunday, October 10, 2010

The Effect of Heat on CPUs and Computer Systems

With all that electricity passing through silicon at an amazing speed, there's sure to be friction; and heat. The experts are continuously telling us how important it is to cool these tiny little pieces of silicon they call "CPUs" and "chipsets". The problem is, parts of the cpu start to deform at high temperatures, also known as "burn out" temperatures. Although there are many many layers to the microprocessor, we focus our attention to the top of the chipset for the most effective overall cooling. So what if it is hot? If the silicon's not deformed then the electrons can pass properly and we make the connection. So why cool it more than you need to?

Well, firstly lets look at silicon. Silicon comes in two types, P-Type and N-type, but effectively, the heat properties of the two behave the same. Silicon, as it heats up becomes more conductive, letting more electrons (put simply, electricity particles) through. Now I know what your thinking, "hold on, if it's more conductive, doesn't that mean it should be faster?", but no. The speed of the computer isn't on how fast the electricity moves through silicon, although, speeding that up would improve things. We've all heard the term, clock speed. Gigahertz. Megahertz. That is, the speed at which it can execute each instruction and synchronize each computer part. So to put it in lemans terms, the faster the clock speed, the quicker the computer (not taking architecture into account, for all you techies out there).

To put all of that simply, a CPUs heat is directly related to it's clock speed; the higher the clock speed, the more power used and subsequently, more heat. Without adequate cooling, today's CPUs can very easily reach well over 150 degrees Celsius, if there weren't systems in place to prevent it. These systems include a clock speed limiter. When the CPU gets above temperature, the CPU management (BIOS - CMOS system) slows it down. This results in a complex system that gives performance increases with a cooler system, and performance slow down in a hot system.

While performance is a big aspect to look at in hot systems, so is the ongoing toll on the hardware. Consistently hot systems aren't expected to last anywhere near as long a cooler systems. Thermal fatigue in silicon results in cracks in transistors, and transistor mounting failures, in particular. Of course, just one transistor failure on a complex system such as a motherboard or graphics card can result in the entire system failing. And a replacement board being an appropriate fix.

What's a safe operating temperature?

Each computer system is different. Operating temperatures depend largely on the CPU type, the provided cooling, the age of the computer, and the motherboard heat management systems. But as a general rule, your CPU should be running between 40 - 60 degrees Celsius, and your system should be between 20-40 degrees. If it's cooler, great. But generally it's not good to have it running hotter. Laptop batteries are largely affected by heat so be sure to take out batteries if

What is appropriate cooling?
As much as some overclockers will say that you really do need a liquid nitrogen cooling system, a basic, air-cooled, computer fan system is usually fine. As long as your not not overclocking and running power intensive programs (like games), any processor will come included with appropriate cooling. If however, your in a particularly hot part of the world, be sure to look into better fan or even water systems.




Tony Schirmer currently operates Tekfix Comptuing Solutions, that offers a large range of computer fans and cooling products, with over 10 years experience in the IT and electronics industry.

Friends Link : find more about Canon Powershot SX10 at SX 10 Revi Fnd more about gps car tracker at GPS car Tracker Cheap blog

Thursday, October 7, 2010

VGA to RCA (Composite) Vs VGA to YPbpr (Component)

How do you connect your Computer to your TV?

Recently there is a lot of commotion about people dropping their cable companies and just plugging in their TV's into their computers and watching cable through their computers via Netflicks, Hulu, and about a thousand other providers out there. personally, I only watch a few shows and have no reason to pay for TV all day long if I only watch a couple hours a week. So the idea of plugging my computer into my TV is awesome. However, If people are anything like me, then they don't have nice fancy TV's that natively take the VGA or DVI connection from the computer.

When I looked at the back of my TV I found that my TV didnt have the connections I needed. All I have on my computer is that useless VGA connection (useless for my TV anyways...). Then the only connections I got on my television are Composite (RCA) or Component (YPrpb). A majority of people just give up at this point, but there are some of us that don't want to accept the reality of our situation, I wanted to connect my computer to my TV, and didn't care what I had to do.

Upon doing a little research I found you can get some little conversion boxes that turn that pre-assumed useless VGA connection into something useful. However, I found myself at a cross roads. On one hand there were the VGA to Composite converters. On the other hand there was the VGA to Component converters. Sure there are lots of little features on each that seem nice, but the major thing I noticed up front was, the price. Component is like, five times as expensive! It can't possible be worth it right?

If I must choose, which is best?

Upon doing a bunch of research, checking with friends, and a bunch of other stuff I was able to get the low down on these mysterious converters. What it really boils down to what you need it for. If you only wanted to watch YouTube videos or simple things like PowerPoint presentations where its all standard video or large text, then by all means get the VGA to Composite converter. I found that the VGA to Composite's quality is going to be somewhere around a nice VHS which is just fine for most applications. The reason it drops in quality so much is simply your going from a VGA connection which is a type of High-Def connection down to a composite which maxes out at a screen resolution of 480i. (Example: Your Nintendo Wii maxes out at this unless you have component connections)

To put that in perspective, on your computer screen, if you change that to 1024x768 (which is relatively low for most new computers) that resolution is going to be rather close to 720p. So that conversion to your TV is going to be a very large jump, going from 720p to 480i. For a lot of people this is like a night and day difference. Regardless on how nice your RCA converter is, it just wont look as great as the VGA connection. A lot of times you will see on pages saying that one is better then the other, but in reality, they are all the same, you just get some extra bells and whistles sometimes.

If you are wanting to surf the Internet, check your email, and pretty much do everything you do on your computer, on the television, then your going to want to go for a better connection like Component, HDMI, DVI, or a direct VGA connection. There are converters for each of these, and DVI can be natively converted right into HDMI if you got the connections. (Side note: You can get single link and dual link DVI to HDMI, little known secret is that, they are exactly the same despite what they may tell you.)

In my case, I don't have a fancy TV with those connections so I was mostly looking into VGA to Component. With component your going to get a very clear picture that you can usually set up to 720p or 1080i (people debate on which looks better so I list both). You will be able to surf the Internet and do whatever you would like to do on your computer on your TV just fine. Of course its not going to look as good if you were natively viewing a VGA to VGA or HDMI to HDMI connection but it will look way good. So depending on what you would like to use it for would be which one you would purchase.

If you're strapped for cash and all you want to do is watch YouTube or simple slide shows in a classroom, then composite would work great. If you want a high quality picture and you got a few extra dollars then by all means, go for component or better. You will be much more happy with the better connection, even though it does cost a bit more.




Jonathan Adams
Tech Writer
For more info you can go to VGAtoComponent.com.

Related : find more about Canon Powershot SX10 at SX 10 Revi you can find more Converter Box at Converter Box Reviews find more save Portable DVD Player

Monday, October 4, 2010

Latest Technology in Computer Hardware

The rate at which new computer hardware products are arriving in the market is simply mind-boggling. As the technology advances, the size and the price of the devices come down, while the efficiency and capacity increase. The scenario is same in all cases, whether it is about internal components like processor, motherboard, RAM, graphics card, and hard disk or for peripheral accessories like mouse, keyboard, and monitors. Personal computers became popular only before about three decades back. But already there are huge piles of outdated and antique hardware components and devices. This is a tribute to the tremendous rate of development of latest technologies in computer hardware field. Perhaps, the newest entrant into the archeological catalogue of computer peripherals is CRT monitors. The sleek looking LCD monitors are spreading like computer virus.

Data storage devices have attracted considerable attention of the technology developers. New kinds of storage devices such as newer versions of flash memory cards, hard disks using latest technology and disks of ever-increasing capacity are the results of advancement in latest technology in compute hardware. The memory size of the random access memory (RAM) cards is soaring to enable the smooth functioning of graphics animation software packages and streaming video websites. Also, computer motherboards have undergone substantial changes over the years. More and more functions are being added to the motherboard. Also, despite the incredible improvement in performance and functionalities, the price of these components has actually fallen steadily.

The most vital component of a computer is the microprocessor. It is in this field that a battle of developing latest technologies in computer hardware takes place. The pace of development of microprocessor increases as the competition between the major processor chip manufacturing companies, Intel and AMD, intensifies. Both the companies are engaging in a neck and neck competition and continuously outdo each other in introducing new technologies.

In the field of computer peripherals, the latest technology in computer hardware is in developing yet another version of wireless mouse and keyboard. The concept of wireless mouse and keyboard is about a decade old. But the development of these items is still a work in progress. The latest products of wireless mouse and keyboard are said to be highly durable and error free.

Some of the developments in the latest technology in computer hardware are gearing up for changing the present concept of desktop and laptop computers. With new developments making possible the convergence of mobile phone technology and computers, a new breed of fully functional palm-top computers are going to be introduced in near future. With touch screen monitors and without the need for a mouse, these gadgets are likely to become the next big leap in the constantly leaping technological development field.




Candis Reade is an accomplished niche website developer and author. To learn more about Technology in Computer Hardware, please visit Electronics Hardware for current articles and discussions.

My Links : find more about Canon Powershot SX10 at SX 10 Revi read about cat condo , cat furniture, cat tower, cat tree. LCD HDTV LN46C630 46-Inch1080p120Hz (Black)and how to buy LCD HDTV Find baby keepsakes gifts

Saturday, October 2, 2010

Zalman VF900-Cu Copper VGA Video Card Cooler



I purchases this because I wanted something quiet, effective and not too large. This definitely accomplishes all those for my 7950GT even with the fan speed turned up to just about 1/3. It may struggle with some of the hotter cards but it cools mine very effectively.

Installation is a snap, although I did remove the adhesive thermal tape on the ramsinks and used Arctic Silver thermal epoxy instead. It does not appear to report fan speeds very well to my motherboard but this isn't a very big concern and could just be a defect with mine.

Zalman VF900-Cu Copper VGA Video Card Cooler

Friday, October 1, 2010

Check Out Universal VGA Card Heatsink & Fan for $14.88

Universal VGA Card Heatsink & Fan Review



Fan works great, the universal monting attachment actually worked quite well. I mounted it to NVIDIA geforce 6600 video card, to replace old fan with wore-out hypro bearings. So far (2 weeks)it works very well, moves a ton of air, and is very quiet. I am using this in a computer that runs my video surveilance system so it is on 24hrs/365days.

My only complaints are; to clear the PCI card installed below this fan I had to remove the plastic fan cover, also my GPU had a two wire power connect, and this unit came with a 3 wire (no big deal I just spliced on the connector from the old unit.



Universal VGA Card Heatsink & Fan Feature


  • HEATSINK/FAN COOLER



Universal VGA Card Heatsink & Fan Overview


Your video card chipset can sometimes run painfully hot - so much so that it could affect its performance, not to mention the risk of permanent damage to not only the video card, but the entire system. This quiet, high-quality cooling system is specially designed to cool most nVIDIA and ATI video cards, in order to optimize their performance. Compatible with the following: nVIDIA chipsets: GeForce 3Ti 200, 3Ti 500, 4Ti 4200, 4Ti 4400, 4Ti 600, 4MX 420, 4MX 440, 4MX 460, FX 5200, FX 5500, FX 5700LE, FX 5600, FX 700, FX 5900, FX 5950, and GeForce 6600. ATI chipsets: RADEON 7200, 7500, 8500, 9000, 9200, 9500, 9600, 9700, and 9800


Available at Amazon Check Price Now!


Related Products



Customer Reviews





Very good - C. Seok - Fort Lee, NJ United States
This looks great and is very quiet. I used to it replace the dead fan on my dad's Ti4200. I was surprised how quiet this was.







*** Product Information and Prices Stored: Oct 01, 2010 05:37:42

See Also : find more about Canon Powershot SX10 at SX 10 Revi digitalcamera find more best about Glycolic Acid and hd video Fnd more about gps car tracker at GPS car Tracker Cheap blog

Tuesday, September 21, 2010

welcome

welcome
Vga Cooler Review  can help to find more vga cooler

enjoy